BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

GBE2c Uplink ports bandwidth aggregation

Aamir_Majeed
Advisor

GBE2c Uplink ports bandwidth aggregation

Hi,

Customer has 2 GbE2c switches installed in C7000 enclosure and they are going to implement VDI on 16 BL 460c G7 server.

 

Customer is concerned abt uplink bandwidth as only one cable may be bottleneck in this scenario.

 

Please assit in order to configure LACP / or any other alternative by which we can increase uplink bandwidth, please bear mind  that these uplinks will be terminated to cisco network infrastructure on other side.

 

 

 

 

Thanks and Regards.

./AM

1 REPLY
classact123
Occasional Advisor

Re: GBE2c Uplink ports bandwidth aggregation

hi  you can config LACP.

Add uplink ports to a LACP group.

And do the same on cisco swtich.(cisco may named it as ether channel)