Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Network Blades
Showing results for 
Search instead for 
Did you mean: 

H6125XLG info on port numbering

Trusted Contributor

H6125XLG info on port numbering

Fredy had a question on the HP Networking H6125XLG port number scheme:




I can’t seem to even find the document that lists the port numbering for the switch!

For example: If you want to create a 4 Member IRF stack between 2 enclosures and you want to use the Bay1-Bay2(internal) interconnects as IRF members and 2 external uplinks to form the ring, I wanted to know the port numbers to plan the configuration ahead of time.




Hoa and Nikul responded:




sent this out back in January.  Hope this helps. 




The cross connect ports are 1/0/17 – 1/0/20.

You can use any port for IRF Virtual Switching.






Other questions or comments?