BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 6120 XG - 3800 style "stacking"?

robertparten
Occasional Advisor

HP 6120 XG - 3800 style "stacking"?

Right now a blade center ahs GBE2c blades and the customer needs a form of "stacking" like Cisco has vPc and the A-series has IRF. Procurve has the real stacking on the 3800 series switch.

 

I am wondering, is this style of "stacking" available on the 6120XG blades to form a stacked unit so that I can "trunk" across the blades on one trunk group?

2 REPLIES
Suman_1978
HPE Pro

Re: HP 6120 XG - 3800 style "stacking"?

Hi,

 

Check this Guided Troubleshooting and refer to Configuration page.

In that page you can check out two docs namely:

HP ProCurve Series 6120 Blade Switches Management and Configuration Guide.
HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide.

 

Refer to Dual-Stack Operation.

 

But I dont think there is any thing like or similar to 3800 stacking.

 

Thank You!

robertparten
Occasional Advisor

Re: HP 6120 XG - 3800 style "stacking"?

I am not talking about IPv6 dual-stack. I am speaking of "stacking" in the sense of creating a virtual chassis.