Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Gbe2c L2/L3 Switch online but no access possible

j_bauernfeind
Occasional Visitor

HP Gbe2c L2/L3 Switch online but no access possible

Hi,

 

we have 2 C7000 Chassis with 2 HP Gbe2c L2/L3 Switch in each of them. The problem is that the Switches in the first Chassis are online, but no access is possible

 

Portscan

Host is up (0.041s latency).
Not shown: 997 closed ports
PORT    STATE SERVICE
22/tcp  open  ssh
80/tcp  open  http
443/tcp open  https

But when i try to connect, nothing happens, only timeout.

The only way to reconnect is to reset the blade switches which is a bad solution ;-)

 

The Switches in the other bladecenter are running fine.

All have the same firmware + boot firmware (5.2.9)

 

Any suggestions?