BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

How to recovery password in GbE2c L2/L3 blade switch?

NIK3
Visitor

How to recovery password in GbE2c L2/L3 blade switch?

Hello, everyone!

Our client forgot password to switch of HPE BladeSystem c7000 Enclosure.

I tried to connect via putty to Console port but it doesn't work. I used simple console cabel USB - Serial ( DB9.)

So for it need especially console cabel?

Or especially configuration in terminal's windows?
How to recovery/reset password on the devicve?

Thank you for any advices.

 

2 REPLIES
Robert_Jewell
Honored Contributor

Re: How to recovery password in GbE2c L2/L3 blade switch?

Have you tried the following:

http://community.hpe.com/t5/HPE-BladeSystem-Network-Blades/GbE2c-L2-L3-blade-switch/m-p/2345329/highlight/true#M53

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
NIK3
Visitor

Re: How to recovery password in GbE2c L2/L3 blade switch?

Thank you!

Yes, i tried the variant, but the switch doesn't answer/react via COM port.
Might be there  should be used especially cable? I use usually DB9 cable for serial interface.