BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Hp GbE2c Layer 2/3 Ethernet Blade Switch Unable to assign management IP address

admin_guy
Occasional Contributor

Hp GbE2c Layer 2/3 Ethernet Blade Switch Unable to assign management IP address

Hi,

 

We assign management ip address of Hp GbE2c Layer 2/3 Ethernet Blade Switch manually using null modem cable & connect thru hyper terminal. We are configuring a VRRP set-up in Hp GbE2c Layer 2/3 Ethernet Blade Switch but didn't accomplish the activities so we reset the flash image of switch to restore to its default settings and even reset the hardware, after sometime when we perform manually assigning management IP address, we couldn't access the switch anymore via hyper-terminal (message is "unable to find mac address. .......), we check the null modem cable, the serial port of remote machine and it works fine. we couldn't find or check the root of the problem, we perform other troubleshooting guide offered by HP in its website but to no avail.

 

Does anyone encountered this problem? Can anyone provide solutions to our problem & HpP team

 

Thank you in advance

 

admin_guy

 

P.S. This thread has been moved from HP BladeSystem to HP BladeSystem Network Blades. -HP Forum Moderator

 

 

 

 

 

1 REPLY
vimukthi_bandra
Occasional Contributor

Re: Hp GbE2c Layer 2/3 Ethernet Blade Switch management IP issue

Unable to assign management IP address using onboard administrator manually set the IP and working !!!!!!!!!!! use below link http://blog.michaelfmcnamara.com/2009/08/lacp-configuration-examples-part-3/