HPE Community
BladeSystem - General
1752687 Members
5647 Online
108789 Solutions
New Discussion

Re: 1709 Slot X Drive Array

 
JBD
Occasional Visitor

‎12-02-2013 01:11 AM - last edited on ‎03-25-2015 12:25 AM by

‎12-02-2013 01:11 AM - last edited on ‎03-25-2015 12:25 AM by

1709 Slot X Drive Array

Hello,

I just install a new Bl460c G8 with 2 fresh HD SAS 500G in raid1 and i receive this error warning at boot:  

1709-Slot X Drive Array - One or more attached drives could not be authenticated as a genuine HP drive...

...Smart Array will not control the LEDs to these drives. Please run ACU or ADU to learn which drives could not be validated as genuine.



When i run ACU he say nothing more ...

All firmware is updated:
HP Smart Array P220i Controller: Firmware version 4.68
HD SAS model MM0500FBFVQ, Firmware version: HPD8

Status is degraded (not authentified)
If anyone have a idea !
Thank

 

 

P.S. This thread has been moved from General  to HP BladeSystem Server Blades. - Hp Forum moderator

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎12-02-2013 01:21 AM

‎12-02-2013 01:21 AM

Re: 1709 Slot X Drive Array

Since you use current firmware already, you should discuss the issue with hp support directly.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
OwenQ
New Member

‎10-02-2016 12:14 PM

‎10-02-2016 12:14 PM

Re: 1709 Slot X Drive Array

The solution might be: FW...

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c03405054

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.