Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
Showing results for 
Search instead for 
Did you mean: 

2 Network interface to the same interconnect bay

Occasional Contributor

2 Network interface to the same interconnect bay

Hi, guys.


c7000 enclosure

bl460c server with 2 embeded ethernet ports + HBA mezzanine + Ethernet mezzanine.

Ethernet Interconnects on Bay 1 and Bay 5 only.

Fiber Interconnect on bays 3 &4


Is it posible to map bl460c eth1 & eth2 to interconect on Bay 1? or do I really need an Ethernet Interconect on Bay2?


Best Regards

Trusted Contributor

Re: 2 Network interface to the same interconnect bay

The port mapping of the ports is defined for each of the blades for the 2 C-Class enclosures. In the c7000 enclosures port1 is mapped to Bay1 and Port2 is mapped to Bay2.


See this document on page 17 there are the port mappings: