BL460 Gen8 and 2012 Hyper-V free

[Ronny Horgen]

Hi, have anyone tried to install the all free Windows Server 2012 Hyper-V on a bl460 Gen8?
I have updated the IP to v1.40, but as I could not get this to work.

I then booted on the free Hyper-V ISO, but was missing the disk driver. Tried to add the Smart Array SAS/SATA controller driver (P220i), but no disk was found.

Anyone else with success on this?

[TVVJ]

You may try this driver:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=5295172&prodNameId=5295174&swEnvOID=4138&swLang=8&mode=2&taskId=135&swItem=MTX-d099b91a60e541f4b195c445f6

Regards,

Vijayasarathy

[Ronny Horgen]

That's the driver I tried and then a rescan, but no disk showed up.

[Ronny Horgen · Accepted solution]

I startet up the node again today, and this time the BIOS said "reseat the storage controller" because of some power thing. I did, and then the bl460 Gen8 never powered on. Support comes tomorrow to replace the motherborad.

[Lpark]

I got it to install, but I can only get one of the network port to be visible in the network settings. Has anyone been able to get both port to show?