Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460 Gen8 and 2012 Hyper-V free

SOLVED
Go to solution
Ronny Horgen
Frequent Advisor

BL460 Gen8 and 2012 Hyper-V free

Hi, have anyone tried to install the all free Windows Server 2012 Hyper-V on a bl460 Gen8?
I have updated the IP to v1.40, but as I could not get this to work.

I then booted on the free Hyper-V ISO, but was missing the disk driver. Tried to add the Smart Array SAS/SATA controller driver (P220i), but no disk was found.

Anyone else with success on this?

4 REPLIES

Re: BL460 Gen8 and 2012 Hyper-V free

Ronny Horgen
Frequent Advisor

Re: BL460 Gen8 and 2012 Hyper-V free

That's the driver I tried and then a rescan, but no disk showed up.

Ronny Horgen
Frequent Advisor
Solution

Re: BL460 Gen8 and 2012 Hyper-V free

I startet up the node again today, and this time the BIOS said "reseat the storage controller" because of some power thing. I did, and then the bl460 Gen8 never powered on. Support comes tomorrow to replace the motherborad.

Lpark
Visitor

Re: BL460 Gen8 and 2012 Hyper-V free

I got it to install, but I can only get one of the network port to be visible in the network settings. Has anyone been able to get both port to show?