BladeSystem Server Blades
Showing results for 
Search instead for 
Did you mean: 

BL460C G6 - Fails to power-on


BL460C G6 - Fails to power-on



Has anyone out there experienced a blade powering-on immediately as soon as it is attached to a C3000/C7000 enclosure?


The green LED iluminates straight away but I am unable to use the KVM/iLO in order to see why it fails to boot through to the BIOS.


I can see from the OA that it receives an iLO IP address and I can ping it although it drops out and then reconnects.


The OA also advises that it powers-off and then on again. The blade is reconditioned and should work. I will investigate further but does it sound like a dead blade?


Thanks in advance