Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c Converged Network Adapter (CNA) ExtTransferSize setting

chuckk281
Trusted Contributor

BL460c Converged Network Adapter (CNA) ExtTransferSize setting

Paul had a customer network tuning question:

 

******************

 

I have a customer who has a performance issues with HP Data Protector with BL460c Gen8, HP MSL library and EVA4400. DP support recommended he set the ExtTransferSize on the hba to 1024kb, which in this case is the 554FLB adapter. The server is running windows 2008 R2, but can’t set this parameter on the 554 FLB. He can however set it on his G7’s that have additional Emulex HBAs.

 

Question, can the 554GFLB on Gen8 blades have ExtTransferSize parameter changed?

 

**************

 

Input from Dave:

 

****************

 

You should be able to change it with the Emulex OneCommand tool:

 

webpic161.jpg

 

I have changed it recently on a customer to control IOSize as indicated here:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02518189

 

***************

 

Any other comments or questions?