Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c Flex-10 No Network

woody140284
Occasional Contributor

BL460c Flex-10 No Network

Hello,

 

We have a c7000 enclosure with BL460c servers installed. We have recently added a new P4000 and so set up a Flex-10 to one of the enclosures. When HP set it up, they set some coniguration to use VLAN10 for management network.

 

When we install ESX servers, we can set the management network to use VLAN10 and we can get a network connection with no problems, however, I am not setting up a Windows 2008 R2 server with the NCU installed and seemingly correctly configured in Virtual Connect, yet we cannot get any network access to the server at all (apart from iLO).

 

Can anyone think of something I need to set to allow network traffic in and out of this server?

 

Thanks