BladeSystem - General
1748128 Members
3546 Online
108758 Solutions
New Discussion

BL460c Gen9 (H9Q37A) and Interconnect Module copmpatibility

 
SOLVED
Go to solution
SHIMSOFT
Occasional Advisor

BL460c Gen9 (H9Q37A) and Interconnect Module copmpatibility

BL460c Gen9 (H9Q37A) is built-in standard "HP FlexFabric 10Gb 2port 536FLB Adapter".

 

My C7000 enclosure installed Interconnect Module is 410917-B21 of BladeSystem c-Class GbE2c Ethenet Switch Module.

 

Is these devices are comatible ?  or not?

 

410917-B21 datasheet listed old generations servers only (about G6).

 

 

3 REPLIES 3
TVVJ
HPE Pro
Solution

Re: BL460c Gen9 (H9Q37A) and Interconnect Module copmpatibility

 

Hi,

 

The Compatibility section in the HP FlexFabric 10Gb 2port 536FLB Adapter's QuickSpecs indicate that the following modules are supported as of date:

 

  1. HP Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem
  2. HP FlexFabric 10Gb/24-port Module 
  3. HP Virtual Connect Flex-10/10D Module for BladeSystem c-Class 
  4. HP 6125G/XG Ethernet Blade Switch 
  5. HP 6125G Ethernet Blade Switch 
  6. HP 6120XG Blade Switch 
  7. HP 6120G/XG Blade Switch 
  8. HP 6215XLG Blade Switch 
  9. HP 1:10Gb Ethernet BL-c Switch 
  10. Cisco Catalyst 3120G Blade Switch for HP 
  11. Cisco Catalyst 3120X Blade Switch for HP 
  12. Cisco Catalyst 3020 Blade Switch 
  13. Cisco Fabric Extender B22HP for HP 
  14. HP GbE2c Layer 2/3 Ethernet Blade Switch 
  15. HP 10GbE Pass-Thru Module 
  16. HP 1GbE Pass Thru Module

The fourteenth item lists "HP GbE2c Layer 2/3 Ethernet Blade Switch" as supported and hence, the FlexFabric adapter should suppor it, but at 1Gb per port connection speed.

 

Regards,

 

Vijayasarathy

 

I work for HPE
Views expressed herein are my personal opinion and are not the views of HPE

Accept or Kudo

SHIMSOFT
Occasional Advisor

Re: BL460c Gen9 (H9Q37A) and Interconnect Module copmpatibility

Thank you very much for your reply.

 

I'm very happy!!

 

I try the many times click to  "thumbs up" icon but not responding... why?

 

 

 

Dennis Handly
Acclaimed Contributor

Re: BL460c Gen9 (H9Q37A) and Interconnect Module copmpatibility

>"thumbs up" icon but not responding... why?

 

Looks like it worked.