Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL465C G7 SPP 2016.10 Installation failed on at least one device

mikldk
Occasional Advisor

BL465C G7 SPP 2016.10 Installation failed on at least one device

Hello people.

 

I get this error message when trying to install the following : 

cp029513 (HPE Emulex 10/20 GbE Driver for Windows Server 2012 R2
Version: 11.1.145.30)

and

cp029518 (HPE Emulex 10/20 GbE iSCSI Driver for Windows Server 2012 R2
Version: 11.1.185.0)

from HP SPP 2016.04 on my BL465C G7.

The server is equipped with the following adapters : 

4 x Network Device: HP NC364m Quad Port 1GbE BL-c Adapter

2 x Network Device: HP NC551i Dual Port FlexFabric 10Gb Converged Network Adapter

Anyone has a solution to this?

Kind Regards Mikkel Knudsen
2 REPLIES
kansma
Occasional Visitor

Re: BL465C G7 SPP 2016.10 Installation failed on at least one device

Hello!

I faced the same problem... I know its April, but perhaps some people like me have the same problem...

Solved it by installing the cp027194.exe from here:

http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_51836c0efeb94098a80bbf75c7

Its an earlier version of the driver. After that i was still not able to update to the latest version... Sadly...

Will try this for the ISCSI Cards aswell... But for now i have an Network Card rollin! *Jay*

Hope this helps...

 

Kindly

Mario

mikldk
Occasional Advisor

Re: BL465C G7 SPP 2016.10 Installation failed on at least one device

Hello Kansma.

Meanwhile I changed job - so unfortunately, I cant really test it out.

But thanks for the effort though ;-)

Kind Regards Mikkel Knudsen