Hi everyone,

I am using HP blade servers (HP Enclosure C7000). I have a Full Height Server(BL 660C), I am using Virtual Connect and i using two interconnect bays Bay1 and Bay2 for networking.(both going to trunk ports of the switch and i am using vmwares distributed switch)

When installing ESXi 5.5 should i just select just one network card and give the management IP and deselect other 3 network cards or all the four network cards should be connected.

Also i have half height BL 460 C Gen9 server please guide me experts

I am new to Hp and vmware so please guide me.