BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: BL660cGen9 + MSA2040 mounting device error: (9, None)

 
SOLVED
Go to solution
Highlighted
Regular Advisor

Re: BL660cGen9 + MSA2040 mounting device error: (9, None)

Normally autonego do the job , but sometimes not so

First check under HBA bios if link and lun are see

If yes

This is an issue with os driver

If not

Need to check speed to end to end

Good luck





---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
Highlighted
Occasional Advisor
Solution

Re: BL660cGen9 + MSA2040 mounting device error: (9, None)

SOLUTION: the freaking SFPs were incorrect. We had AJ716A (Series-A), but since we have Brocade SAN switches on the C7000 the correct kind should had been: AJ716B (Series-B). Sure enough, as soon as the SFPs were replaced, we did not see that aweful "mount Fail: (9, none)".

I really wish that HPE would have a way to verify the type of SFP you have from the OA or blade iLO.