BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL680c G7 not seeing LOM 5 & 7 in ESXi 5.0

chuckk281
Trusted Contributor

BL680c G7 not seeing LOM 5 & 7 in ESXi 5.0

Chris was having issues with a VMware install:

 

******************

 

We are doing an Enhanced networking install with Flex-10 and bl680c G7s, installed with the HP October ESXi 5.0.

LOM 5 & 6 are not showing up in ESX, they are assign in the profile, and the vmnic number jumps around and leaves these out.

The Emulex firmware is current.

 

webpic69.png

 

****************

 

Input from Kojiro:

 

****************

 

You can see only 13 NIC that seems  to change be2net driver’s heap_max value.

Did you configure heap_max value  using following command ?

 

esxcfg-module -s "heap_max=20971520" be2net

 

**************

 

Any other suggestions or help for Chris?