BladeSystem Server Blades

Blade movement btw C7000 Enclousures

 
wFrancoti
Occasional Visitor

Blade movement btw C7000 Enclousures

Hello Forum team,

I need to move 2 blade BL460c G9 from a C7000 enclousure running OA 4.60 to a C7000 Enclosure running OA 4.95 version, is there any issue due to OA version or it can be done with no issues?

Thanks

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Blade movement btw C7000 Enclousures

Make sure to remove the VC profile from the blade (if exist) before moving the blades.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
wFrancoti
Occasional Visitor

Re: Blade movement btw C7000 Enclousures

There is no VC in this enclousure so can I move safety?

sudhirsingh
HPE Pro

Re: Blade movement btw C7000 Enclousures

Hi,

 

There should not be any issue,

Minimum version supported is 4.11 where as in your case it is much higher 4.60.

 

Blade compatibility matrix

https://support.hpe.com/hpesc/public/docDisplay?docId=sf000050596en_us&docLocale=en_US

 

Suggestion,

1.Please Unassign VC profile before moving blades,

2.Make sure you update ILO4 to latest as well, after moving to different chassis.

 

 

I work for HPE
Accept or Kudo