BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Boot Device ID above 16 not recognized

Tom-Ish
Occasional Visitor

Boot Device ID above 16 not recognized

trying to get an HP BL465 G6 - w/Emulex LPe1105-HP 4Gb FC HBA to boot from EMC Symm2000.  BIOS recognizes SAN - device ID.  However - if device ID is above 16 (ex. 2D versus 00F) the HBA loses the setting and defaults back to 00.

 

Any thoughts/suggestions would be greatly appreciated.

 

Thanks in advance

2 REPLIES
chuckk281
Trusted Contributor

Re: Boot Device ID above 16 not recognized

I will see what the experts say.

Tom-Ish
Occasional Visitor

Re: Boot Device ID above 16 not recognized

Thanks - just realized I left out one thing - if I do set the device ID to anything below 16 - it works as it should.