BladeSystem Server Blades
Showing results for 
Search instead for 
Did you mean: 

C7000 Config Newbie

Occasional Contributor

C7000 Config Newbie

Hi Guys,

We have bought a c7000 with 4 460c gen6 servers, 2 x HP 1/10Gb VC-Enet Module switches, we use vmware v6 and would have a different network on the switches so we can seperate the data from vmotion, anyone any idea to config this, can i make a vlan on 1 switch or one port of the switches? Or do i have to use the virtual connect? If there is someone how can and is willing to advice i apriciate it very much.



Acclaimed Contributor

Re: C7000 Config Newbie

If you have this VC modules, you just need to configure them. Get the VC user guide and read the chapter about networks.


There are several cookbooks around like this:

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!