BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

CentOS not seeing any fiber on BL460 Gen9 servers

shill
Occasional Collector

CentOS not seeing any fiber on BL460 Gen9 servers

We just purchased a couple BL460 Gen 9 servers and installed CentOS 6.5 and CentOS 7 on them.  Our problem is we are trying to connect Fiber to the OS but CentOS is not see any Fiber Connecitons.  I've installed VMware ESXi on the same blade and it see the fiber so I know it's configured it ok.   My Linux admin ran lcpci | grep -i fibre and it did not pull anything up.   lcpci did not show anything when looking thru the list.

I have 20 Gen9 servers running ESXi with no issues.  We are trying to get CentOS installed local

Any help would be appreciated.

 

 

 

2 REPLIES
Jimmy Vance
HPE Pro

Re: CentOS not seeing any fiber on BL460 Gen9 servers

What are you using as the fibre channel adapter?




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
shill
Occasional Collector

Re: CentOS not seeing any fiber on BL460 Gen9 servers

No additional cards are being used.  I'm using the HP FLexFabric 20GB 2-port 630FLB Adapter from the blade server that I have setup in Virtual Connect.  Virtual connect is setup so the blade server looks like it has two 6GB nics and two 4GB fiber connecitons.