Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Controller status is failed on system board for BL 460C Gen9

hsarva777
Occasional Contributor

Controller status is failed on system board for BL 460C Gen9

Hello All , 

We are using ProLiant BL 460C Gen9 , In ILO's the storage is failed and the controller status is failed. Can you suggest me with the sollution. should we need to replace the HP smart array p244br controller. Thanks    

1 REPLY
Robert_Jewell
Honored Contributor

Re: Controller status is failed on system board for BL 460C Gen9

Hard to say without further details.  From SSA utility see if you can locate more info about what is actually failed.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!