Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
Showing results for 
Search instead for 
Did you mean: 

HP BL460c Gen8 ILO Problem

Occasional Contributor

HP BL460c Gen8 ILO Problem

Hi All HP Experts,


                               Good day! need your advise we have a C3000 Enclosure with 6 x BL460c Gen7 Server and we purchased a new BL460c Gen8. But I having a hard time to remote the new Server. I already upgrade the OA firmware from 3.21 to latest 3.56 version. Attached are the errors I encountered. The Enclosure IP Bays settings already have an IP address corresponding to each BAY. The free bays are 1 and 8. Kindly see attached errors.


Best regards,


Oscar A. Perez
Honored Contributor

Re: HP BL460c Gen8 ILO Problem

What iLO4 firmware version do you have?

If you feel this was helpful please click the KUDOS! thumb below!