BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Blade 460c G6 Flex-10

ramdom
Occasional Visitor

HP Blade 460c G6 Flex-10

Hello,

Updated HP BL460c G6 with SPP 2017.04.0
After the update at server startup time the "Flex-10" does not light up. How to restore the work of Flex-10?

before updating

after update

after update

after installation 

2 REPLIES
smokin901
HPE Pro

Re: HP Blade 460c G6 Flex-10

Hi,

Can you provide more information like which commponents got updated from which firmware to which firmware

I am an HPE Employee
The comments in this post are my own and do not represent an official reply from the company

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution
SumeetK
HPE Pro

Re: HP Blade 460c G6 Flex-10

Hello,

Version:2016.10.0 (24 Oct 2016) was the last SPP that will carry support for HPE ProLiant G6 servers. 

Version:2017.04.0 (21 Apr 2017) is not recommended for G6 servers. 

BL460c G6 goes with Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter.

In this situation, you can check if the NIC is being detected in RBSU/BIOS under PCI device. If yes, please download and run the SPP Version:2016.10.0 in interactive mode to re-flash the firmware. ( Might require you to select FORCE switch to push firmware)

If not, please log a case with HPE support for further assistance.

I am HPE Employee

If it resolves the issue, please consider marking it as an Accepted Solution.

The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.