Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Firmware ISO Fails to boot correctly from USB Stick - BL460c

Alisdair Philp
Occasional Contributor

HP Firmware ISO Fails to boot correctly from USB Stick - BL460c

We have created a Firmware USB stick using the HP USB Key Utility and the 9.10 ISO image. We have added the latest BIOS / SmartArray FW scexe files in to \HP\swpackages as instructed on the HP webpage. When we boot the blade via iLO Virtual USB from a PC the boot fails at 34%. The USB stick works fine when plugged directly into a DL380G7 for example. Anyone got any ideas or experiences trying this out?

 

Message:

 

"Boot Failed: Please change disks and press a key to continue"