Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant BL460c G6 - iLO network configuration problem

ratafonso
Occasional Contributor

HP ProLiant BL460c G6 - iLO network configuration problem

Hello Guys,

We have a problem with my Blade Server HP ProLiant BL460c G6.

My Blade cannot get IP Address from iLO and show me a error below:

"iLO network configuration problem, check connectivity to iLO default gateway".

We tried to reset the blade, I remove the battery from motherboard for 40 minutes and plug on the enclosure again, after a few minutes, the message is showing again.

In attachment, follow the print screen of OA.

Somebody can help me to resolve this?

Thank You Guys.

2 REPLIES
Torsten.
Acclaimed Contributor

Re: HP ProLiant BL460c G6 - iLO network configuration problem

Did you check the EBIPA setting in OA?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ratafonso
Occasional Contributor

Re: HP ProLiant BL460c G6 - iLO network configuration problem

I tried to check the EBIPA, but, i can't see anything. I tried to configure the EBIPA, but, i don't know how to do.

Following "Show All" in attachment.

Obs.: For to see the Show All, rename the file from .jpeg to .log