Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Hardware iSCSI and Fibre Channel from the same Blade BL620c G7

chuckk281
Trusted Contributor

Hardware iSCSI and Fibre Channel from the same Blade BL620c G7

Andrew had a BL620c G7 question:

 

**********************

 

Does any one know....

 

The BL620 has Four FlexFabric devices - is it possible to use two for Fibre Channel and two for Hardware iSCSI?

 

*************************

 

Chris replied to Andrew:

 

************************

 

The Virtual Connect 3.15 simulator allows the configuration.

 

The FC connections go to LOM 1 & 2 and iSCSI to LOM 3 & 4.

 

With some tweaking you may be able to reverse this but can't split between LOM pairs.  The dual port adapter has to be either FC or iSCSI, can't split up the ports.

 

See attached for visual confirmation.

 

*********************

 

Have you implemented this? Let us know how it works.