Hardware iSCSI and Fibre Channel from the same Blade BL620c G7

[chuckk281]

Andrew had a BL620c G7 question:

**********************

Does any one know....

The BL620 has Four FlexFabric devices - is it possible to use two for Fibre Channel and two for Hardware iSCSI?

*************************

Chris replied to Andrew:

************************

The Virtual Connect 3.15 simulator allows the configuration.

The FC connections go to LOM 1 & 2 and iSCSI to LOM 3 & 4.

With some tweaking you may be able to reverse this but can't split between LOM pairs.  The dual port adapter has to be either FC or iSCSI, can't split up the ports.

See attached for visual confirmation.

*********************

Have you implemented this? Let us know how it works.