Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

IML problem entry after Chassis firmware upgrade

Steve-T
Occasional Contributor

IML problem entry after Chassis firmware upgrade

I recently upgraded the OA firmware in a c7000 Blade Chassis.

 

Now, on some of my servers in that chassis, I have an IML log entry:

 

Chassis Enclosure Serial Number XXXXXXX requires minimum firmware revision 03.10.  It is currently 04.01.

 

Any idea why this happens.

Screen shot attached.

 

Thanks,

Steve

2 REPLIES
Torsten.
Acclaimed Contributor

Re: IML problem entry after Chassis firmware upgrade

not enough information, but ilo and bios are likely still too old.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Steve-T
Occasional Contributor

Re: IML problem entry after Chassis firmware upgrade

Torsten, thank you for your reply.

 

The blade is a BL460c G7.  As part of the same upgrade, I upgraded the iLO 3 and did a ROM flash.  I wanted to apply the ROM flash because HP stated there was a critical update required.

 

My server runs WIndows 2008 (not R2).

 

I will attach screen shots of the firmware and software I have.

Thanks,

Steve