HPE Community
BladeSystem - General
1753808 Members
7735 Online
108805 Solutions
New Discussion юеВ

Is it Possible to Read Array Configuration from iLO3?

 
pakm11
Advisor

тАО12-22-2011 09:49 AM

тАО12-22-2011 09:49 AM

Is it Possible to Read Array Configuration from iLO3?

Bare metal blade servers (NO OS).

I am tyring to find out a scriptable way to pull this information either from iLO or OA CLP.

Anyone had any experience?

0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО12-22-2011 10:39 AM

тАО12-22-2011 10:39 AM

Re: Is it Possible to Read Array Configuration from iLO3?

Try to press F10 at the end of boot to go to the maintenance menu, select Inspect and run the Array Configuration Info tool.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
Psychonaut
Respected Contributor

тАО12-22-2011 11:32 AM

тАО12-22-2011 11:32 AM

Re: Is it Possible to Read Array Configuration from iLO3?

Not that I know of, you have to fire up the server and go into the utility to see that info.

0 Kudos
Reply
Goutham_Sabala
Esteemed Contributor

тАО02-21-2012 07:07 AM

тАО02-21-2012 07:07 AM

Re: Is it Possible to Read Array Configuration from iLO3?

I dont think so, access the server through ILO and boot to ACU from smart start ( offline method )

Was the post useful? Say thanks by clicking the white KUDOS Star!
Goutham Sabala
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.