Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Mgmt Processor failed in svr bay 1, Reset the blade or reset the ilo2

SOLVED
Go to solution
vipink430
Occasional Advisor

Mgmt Processor failed in svr bay 1, Reset the blade or reset the ilo2

Hi ,

 

my server is now down and showing the error Mgmt Processor failed in svr bay 1, Reset the blade or reset the ilo2,

 

power itself not showning(not at all booting up)..

 

Please help me ithis problem ,

 

 

P.S. This thread has been moved from Storage > General to HP BladeSystem Server Blades. - Hp Forum Moderator

 

 

 

4 REPLIES
Torsten.
Acclaimed Contributor

Re: Mgmt Processor failed in svr bay 1, Reset the blade or reset the ilo2

As a first test you can pull the blade from the enclosure and push it back. Does it work now? is it visible from OA?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
vipink430
Occasional Advisor

Re: Mgmt Processor failed in svr bay 1, Reset the blade or reset the ilo2

i pulled out the server and put it in different slots also ,, still its not working . power button not glowing

Torsten.
Acclaimed Contributor
Solution

Re: Mgmt Processor failed in svr bay 1, Reset the blade or reset the ilo2

If the blade is totally dead you probably need a new system board.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
vipink430
Occasional Advisor

Re: Mgmt Processor failed in svr bay 1, Reset the blade or reset the ilo2

thank you Toresten,

 

 Any other solution , please post it.