BladeSystem Server Blades
Showing results for 
Search instead for 
Did you mean: 

Minimum BL460c G6 firmware supported

Trusted Contributor

Minimum BL460c G6 firmware supported

Mike had a firmware question:





What is the minimum bios firmware supported for BL460c G6 with the Virtual Connect FlexFabric module and HP BLc NC553m DP FlexFabric Adapter.     Customer is at 3.21 on OA and bios is I24 09/02/2010




Eirik replied:




You could take a look at the Compatiblity matrix over at


Anyways, I would say it’s best practice to keep in line with a specified release set, so if your customer hasn’t upgraded the enclosure in a while he might want to do a analysis and an eventual upgrade.