Hi All,
I have upgraded our BL460c G7 to Windows 2016. but now get BSOD issues.
I running the following mezzanine cards.
NC364M 1GB Quad Port
NC542M 10GB Dual Port
I have managaged to get my blade to boot if I disable the NC542M in the Blade BIOS.
But if I have it enabled windows during startup bluescreens with an
"SYSTEM THREAD EXCEPTION NOT HANDLED"
I have a chassis full of these that I need to upgraded to windows 2016.
We need the 2 x 10GB onboard, + the 2 x 10GB NC542's and the 4 x 1GB NC364's in out virtual connect environment.
Any help would be greatly appreciated.
Cheers
Adam
