Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
Showing results for 
Search instead for 
Did you mean: 

PXE NIC boot order question

Trusted Contributor

PXE NIC boot order question

Question from Greg:




How do I change the PXE boot order of the nics?




Reply from Anton:




Once you enable PXE on the NIC ports(embedded Port1 should have PXE enabled by default), the ports should appear in the boot order of the server – from there you can set which NIC port is used to boot first…

All that is done from the RBSU(don’t know which gen and nic you are referring to) but you can look in the RBSU user guide – pages 54 and 122 is what I think you need:




Other comments or suggestions?