Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Port Mapping - HP 6125G Ethernet Blade Switch

EminH
Occasional Visitor

Port Mapping - HP 6125G Ethernet Blade Switch

Greetings!

Can anyone please assist with mapping internal links to uplinks in HP6125G switch?
I read through the "HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Configuration Guide" and could not find required command or procedure. Right now I have an example of desired configuration:
Current config:
Blade NIC1 connected to Internal -> GigabitEthernet1/0/9
Mapped to Uplink -> GigabitEthernet1/1/8
Desired config:
Blade NIC1 connected to Internal -> GigabitEthernet1/0/9
Mapped to Uplink -> GigabitEthernet1/1/7

 

Thanks

 

Emin