Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Power Management Controller (PMC) showing as "Not Available:

chuckk281
Trusted Contributor

Power Management Controller (PMC) showing as "Not Available:

Allan was having an issue with some blades:

 

*************

 

I’m looking to see if anyone has seen this message before and if so what was the fix?

 

 

7 New (actual remarketed Blades) BL460c G6 Blades were installed in an Enclosure.

Both the Show All Excel output and the Rack Firmware GUI show the PMC Version on one blade only  as: Power Management Controller Version: Not Available.

 

I appreciate any feedback.

 

**************

 

Questions from Dave:

 Have the ‘new’ blades been powered on?

PMC will not display until powered on.

 

What version is the OA?

If it is to old it may have issues reading the G6 blades or the G6 blades may need to be updated.

 

Does it show the iLO and ROMBIOS versions?

 

What are they at?

 

Has the site tried running any SPP on the blades?

 

Maybe a ‘showall’ from the enclosure?

 

Input from Mike:

There are a few known issues  with the PMC in the blade that could be in play here, I would reference this doc which covers most of them –

 

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=1146658&prodTypeId=15351&objectID=c02055528&printver=true

 

************

 

Comments or help?