Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant BL460c Gen8 is not able to get IP address from remote DHCP server

JOSE_M
Occasional Visitor

ProLiant BL460c Gen8 is not able to get IP address from remote DHCP server

Hi,

 

we need to install SLES12 in several BL460c Gen8 by using PXE/DHCP configured in a remote jumpstart server. The server is perfectly working for other type of server.

 

I can see the DHCPDISCOVER and DHCPOFFER for the blade mac address in the server /var/log/messages, but not the DHCPACK and sucesive, so the blade (dhcp client) does't get IP address. 

 

If I force the blade to boot over DHCP, the messages that it shows are:

 

dhcpcd[4003]: eth0: timed out
dhcpcd[4003]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
dhcpcd[4003]: eth0: broadcasting for a lease

 

 

Please, help!!!

1 REPLY
JOSE_M
Occasional Visitor

Re: ProLiant BL460c Gen8 is not able to get IP address from remote DHCP server

Finally resolved by myself, issues with the tags, concretly I have added the untagged port (Bay1 x6) directly in the Ethernet Network without create a Shared Uplink before.

 

BR,

JM