ProLiant BL460c Gen9 -Degraded

[owahid]

hello

I have this problem in one of the blades

hello

I have one of my blades status is degraded , The attached screen show the error , actually I did not get what the problem realy is , is it the processror or the BIOS or firmware or what?

If any one can help the root cause and available solutions?

thanks

[sudhirsingh]

Hi @owahid 

Is there any other UMCE errors seen along with with Bank 0/1 ? however

based on these : Bank 0/1 and MScode 0010/000,  seems like is a faulty memory.

Is there any memory error logged in IML ? if yes please replace it.

Other workaround:

1. Update BIOS to latest.

2. Make following settings in the BIOS:

 HP Power Regulator: - HP Static High Performance Mode
 HP power profile: Maximum performance
 Minimum Processor Idle Power State :- No C-states
 Disable collaborative power control

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

Sudhir

[sudhirsingh]

Hi @owahid 

Did the above reply be of helpful? If yes, you can mark it as accepted solution, if not, feel free to revert.

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

Sudhir