Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Remove Flex-10 Flexnic from BL465C G6

SOLVED
Go to solution
MaydayIT
Occasional Contributor

Remove Flex-10 Flexnic from BL465C G6

Hi all.

 

We've recendly made some network changes, and no longer need two of the FlexNICs we had previously used.  I removed these from Virtual Connect, but they still show in the BIOS setup, and are presented to operating systems (VMware in this case).  How do I get rid of these unneeded NICs?

 

Thanks in advance for any assistance you can offer.

3 REPLIES
Jimmy Vance
HPE Pro

Re: Remove Flex-10 Flexnic from BL465C G6

These two links should provide information your looking for

 

http://www.v-front.de/2011/06/how-to-hide-unused-flexnics.html

 

http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03923055

 

 

 

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
msh_it
Frequent Advisor
Solution

Re: Remove Flex-10 Flexnic from BL465C G6

Hi

 

What is the firmware of the virtual connect, in newer version there is an option to hide unused NICs.

 

 

-------------------------------

msh_it | UAE | AbuDhabi

If you feel this was helpful please click the KUDOS! Below!
MaydayIT
Occasional Contributor

Re: Remove Flex-10 Flexnic from BL465C G6

Yes, I found that while digging for the answer, and sadly, I'm one version behind and need to stay there until I can retire an old server being used as an ISCSI box.

 

Thanks for responding though.

 

BTW, for anyone else looking for this, you must be on VC firmware 4.31 to see this option.  We're at 4.30 :(.