Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

SAN - port speed mismatch

chuckk281
Trusted Contributor

SAN - port speed mismatch

Usha had a customer question:

 

**************

 

 

Hi experts:  We have a BL660c that we are trying to enable PXE boot on a 366M add-on Mezz card. Do you have any documentation on how to do that?

that's a 4port 1Gb mezz NIC..

 

If anyone know did this before or how do this, please helps us to help the customer

 

*************

 

Help from Hoa:

 

*************

 

366M is Intel based NIC, so you may need to use the tool from Intel.

 

Notice: HP Intel-Based Network Adapters - PXE Is Not Enabled by Default on Intel-Based HP Network Adapters and the Intel BootUtil Package Must Be Downloaded In Order to Make Networking Modifications to Those Adapters

http://h20566.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c03388152-1

 

**************

 

Other comments or questions?