Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Server degraded because insufficient power in the enclosure

emulet
Occasional Visitor

Server degraded because insufficient power in the enclosure

Good Night,

 

I update the ILO firmware of my BL460c G6 server. I did this with the server off. 

 

wheen i tried to turn it on it saids that theres insufficient power in the enclosure to power on.

 

the servers was woorking well before i update the ilo firmware.

 

Any ideas?

2 REPLIES
PGTRI
Honored Contributor

Re: Server degraded because insufficient power in the enclosure

hi,

 

Please check the power management settings in OA. It's possible , that these were changed after the update.

What's the current FW version of the OA ?

 

regards,

How to Say Thank You? Just click the KUDOS!
emulet
Occasional Visitor

Re: Server degraded because insufficient power in the enclosure

I update the firmware of the servers ILO from 1.79 to 2.07. afterr check some configurations i find that a new release of the onboard administrator firmware resolve that issue so i update it to the version 3.55.