Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Server power loss caused by: voltage regulator

okisakti
Occasional Contributor

Server power loss caused by: voltage regulator

Hello all,

i have blade c3000 enclosure with 8 host (ProLiant BL460c G7), last night one of host turned off it self suddenly then i check the ilo event message it show :

  • server power removed
  • Power on request received by: Automatic Power On.
  • Server power loss caused by: voltage regulator. Attempt to restore server power in 8 seconds.

i checked other host ilo event message it show :

  • server power removed
  • server reset

although it give the error message but the other host is up not like one host can't turned off with amber lamp.

until now the host (one host problem) can't turn on,could you help me to give me suggestion what step to take this problem resolved?

FYI :

  • iLO Firmware Version : 1.26 Aug 26 2011
  • c3000 DDR2 Onboard Administrator Module : current firmware version is 2.9