Setting Remote Console Mode via RIBCL on ILO4 possible?

[Jo239]

Hi Guys,

i try to change on ProLiant WS460c Gen8 WS Blade the "Remote Console Mode" via RIBCL but i can find anything about that. I read the "HPE iLO 4 Scripting and Command Line Guide" but there is nothing about that, so it isn't possible?

I know that i can change the  "Remote Console Mode" via conrep-utility or directlyl in the BIOS. I'am only interested in setting it via RIBCL or other possibilities that i can use from ILO directyl.

Any help will be appreciate.

Thanks in advance

Jo.

[Torsten.]

Please explain what "mode" setting you are looking for.

[Jo239]

Hi Thorsten,

thanks for your reply.

I'am looking for the Option "Remote Console Mode" thats the name in the BIOS (under System Options) where i can change the Mode from Setup to User or Admin.

I do install the Blade in "Setup Mode" and after that i have to reboot, change to BIOS and set the Remote Consle Mode to "User Mode". It would be awesome changing the Mode via RIBCL so i have only to reboot and save a lot of time without entering the BIOS :)

Hope its clear what i mean :D

Thanks in advance

Jo