BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Setting Remote Console Mode via RIBCL on ILO4 possible?

Jo239
Occasional Visitor

Setting Remote Console Mode via RIBCL on ILO4 possible?

Hi Guys,

i try to change on ProLiant WS460c Gen8 WS Blade the "Remote Console Mode" via RIBCL but i can find anything about that. I read the "HPE iLO 4 Scripting and Command Line Guide" but there is nothing about that, so it isn't possible?

I know that i can change the  "Remote Console Mode" via conrep-utility or directlyl in the BIOS. I'am only interested in setting it via RIBCL or other possibilities that i can use from ILO directyl.

 

Any help will be appreciate.

Thanks in advance

 

Jo.

 

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Setting Remote Console Mode via RIBCL on ILO4 possible?

Please explain what "mode" setting you are looking for.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jo239
Occasional Visitor

Re: Setting Remote Console Mode via RIBCL on ILO4 possible?

Hi Thorsten,

thanks for your reply.

I'am looking for the Option "Remote Console Mode" thats the name in the BIOS (under System Options) where i can change the Mode from Setup to User or Admin.

I do install the Blade in "Setup Mode" and after that i have to reboot, change to BIOS and set the Remote Consle Mode to "User Mode". It would be awesome changing the Mode via RIBCL so i have only to reboot and save a lot of time without entering the BIOS :)

 

Hope its clear what i mean :D

 

Thanks in advance

Jo