BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Update FW hang on BL460c G7

SOLVED
Go to solution

Smart Update FW hang on BL460c G7

I am trying to do a firmware update on a BL460c G7 server.  I burned a DVD of the latest Smart Update Firmware (10.10) and I am booting to this dvd and chosing the automated option.   After a minute or two it tells me it is Analyzing the system for unattended installation.  This could take several minutes.  

 

And there it sits.  I even let it run over night and nothing.  I have tried it several times with no luck.  I used this same dvd to upgrade another one of my blades and it worked just fine.

 

Any suggestions on how I can update the firmware on this server?

2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: Smart Update FW hang on BL460c G7

The latest image is SPP 2013.02:

 

http://h18004.www1.hp.com/products/servers/service_packs/en/index.html

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: Smart Update FW hang on BL460c G7

Great that did the trick.