Greg had a question when powering up server during the POST times:
*****************
I have a large client who is complaining it takes a long time to get through the post process. (Measured from power on until the OS starts to boot.) Some of these servers have a large amount of memory. Are there any BIOS options that can be used to speed up the process? I know with BCS servers there were options that could turn off early self-tests which in turn sped up the boot process. Granted, turning off these tests had its own issues but is there anything in the BIOS of G6/G7 blades that can be tweaked to speed up the boot process? They are getting a large number of new G7 blades next week and they want to speed up the boot process for the initial deployment.
*********************
Reply from Anton:
***************
There is an option in the ROM-Based Setup Utility (RBSU) called “POST speed up”, see page 165 in the RBSU user guide:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00191707/c00191707.pdf
Quote:
“POST Speed Up
The POST Speed Up option is a toggle setting that enables or disables the extended power-up
memory test. When POST Speed Up is set to Enabled, the extended power-up memory test is not
executed, and the server powers up more quickly.”
Even if that’s the Gen8 RBSU guide, this options is there since G6s I think(if not even earlier generations)…
*****************
Other comments or suggestions?
