BladeSystem - General
1748180 Members
4071 Online
108759 Solutions
New Discussion

Re: Unable to connect all network interfaces

 
asavage0930
New Member

Unable to connect all network interfaces

Hello all,

I am having trouble connecting all of my network interfaces on my ProLiant BL460c Gen8 server.  This server is running ESX 5.,5 and even in the ESXi management interface, it shows 1,3,5,7 connected and 2,4,6,8 disconected.  This is the same as I am seeing on the actual server itself when viewing it through the iLO.  I opened a case with HP but they were no help to me and told me everything was correct.  Obviously it isn't as I cannot see one of my SANs through VMWare and I suspect it has something to do with half of the NICs being down.  Any help is appreciated.  

ProLiant BL460c Gen8 Server

FLB Adapter 1: HP FlexFabric 10Gb 2-port 554FLB Adapter

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: Unable to connect all network interfaces

What interconnect modules (backside of the chassis - bay 2) are you using?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!