Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to enable RSS on 554FLB nics

htj
Occasional Visitor

Unable to enable RSS on 554FLB nics

I am trying to enable RSS on a BL460c Gen8 server running Windows 2012 R2 Hyper-V according to MS recommendations.

The server, CNA's, Virtual Connect are running lastest firmware/drivers.

 

Virtual connect server profile for each LOM:

 - 3 Ethernet network adapters

 - 1 FCoE HBA

 

The first Ethernet adapter for each LOM is enabled for RRS  by default.

But I cannot enable the second and third Ethernet adapter for each LOM.

 

I use the Enable-NetAdapterRss PowerShell CmdLet to enable RSS and I get back error 50, which translates to "The requested operation is not supported."

 

http://emulex.force.com/knowledgebase/articles/How_To/RSS-and-VMQ-Tuning-on-Windows-Server

 

Any idea on how to enable RSS on the second and the third Ethernet adapter for each LOM?

 

Thanks

 

/Henrik