BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

VMware and iLO - not working on one HP proliant

 
Delphaa
Occasional Visitor

VMware and iLO - not working on one HP proliant

Hello all,

I have 3 Proliant servers of a similar age, all running identical versions of ESXi  (5.5.0 3568722)

On one of them iLO isn't working, and I can't ping its IP. The iLO port is connected to a switch but no LED is showing.
I have eliminated the switch port and cable as being an issue. It was working, it suddenly stopped recently.

I have SSH'd in and checked in hpocnfg -g and it shows as running with the correct IP address.

hpocnfg -w shows the correct expected output MyIndigoCard Login

I can't reboot this server and get into bios for a while so my question is - can I load something in vmware that will help me troubleshoot this?

many thanks

1 REPLY 1
RaviTyagi
HPE Pro

Re: VMware and iLO - not working on one HP proliant

Hello Delphaa,

There are no commands from Esxi perspective in order to troubleshoot a problem with the ILO .However from the description it appears to be a problem on the Physical Network .We would request you to open a Support request for the same .

 

Regards,

RRT 

I am an HPE Employee

I am a HPE Employee

Accept or Kudo